IMO Safety Signs & Marine Signage
Find signs by name, IMPA number or Everlux reference, build a complete sign list, or upload your vessel's signage requirement and let MariTeam prepare one consolidated quotation.
Find the exact sign or reference
Search by sign name, IMO terminology, six-digit IMPA number, Everlux reference or MariTeam part number.
Request quotation
Send the selected products, paste your requirement, or upload a complete vessel sign list. MariTeam will review every line and confirm the correct products and variants in the quotation.
Maritime safety signs and marking products
Photoluminescent and maritime safety signage
Everlux manufactures maritime safety signs, low location lighting products, pipe identification tapes and specialist marking products. Product selection depends on the exact function, installation area, vessel specification and required material.
Relevant ranges may relate to SOLAS applications, IMO Resolution A.1116(30), ISO 24409 and associated safety-sign conventions. Compliance is confirmed for the selected product and application rather than assumed for the complete catalogue.
One supplier for complete sign lists
MariTeam supplies available products from our own stock in Denmark and coordinates additional supply through international channels. We support individual replacements, vessel refits, newbuildings and fleet-wide signage requirements.
- One consolidated quotation
- Matching by IMPA or Everlux reference
- Practical review of sizes and materials
- Delivery planning for vessels and shipyards
Choose the right Everlux sign in three steps
You do not need to work through every technical standard. Start with the surface, decide how the sign must be seen, and select the correct fixing method. MariTeam can then verify the exact Everlux reference and documentation.
Choose the material
Photoluminescent 0.39 mm
Photoluminescent 1.2 mm
Choose the viewing direction
front viewCorridorType 2
two-sidedCeilingType 3
suspendedPanoramicType P
wide view
Install it correctly
- CleanDegrease the surface in two passes.
- DryAllow two to three minutes.
- ApplyWork at 15–25 °C, never below 15 °C.
- PressUse firm, even pressure and preferably a roller.
Full adhesion: allow 72 hours at room temperature.
Typical mounting heights
Everlux's guide references these BS ISO 16069 height ranges. Vessel, flag-state and project requirements always take precedence.
Choose extra protection
Salt, humidity, UV, chemicals and aggressive wash-down conditions can reduce exterior durability.
Cleaning: use a dry cloth or one dampened with water. Avoid detergents.
Visible guidance after the normal light source fails
Everlux documents strong afterglow performance for the relevant photoluminescent ranges. The exact certificate should always be checked for the selected product.
after 10 minutes
after 60 minutes
Tell us where the sign will be used
Send the sign name, IMPA number or Everlux reference together with the installation area and preferred material. MariTeam will check the product selection before quotation.
- Correct sign and reference
- Suitable material and fixing method
- Relevant product documentation
Which standards are behind the range?
Everlux documentation references different standards for different purposes: marine safety symbols and their use, escape-route and low-location lighting, shipboard fire and lifesaving plans, and pipe identification. Not every standard applies to every sign.
- Marine safety signs: SOLAS, MED, ISO 24409, EN ISO 7010 and IMO Resolution A.1116(30)
- Escape routes and low-location lighting: ISO 15370 and ISO 16069
- Shipboard plans: ISO 17631
- Pipe identification: ISO 14726
- Additional IMO references: A.752(18), A.760(18) and A.952(23)
The exact product certificate and vessel requirement take precedence.
Questions buyers often ask
Can I request many different signs in one quotation?
Yes. Build a quote list online, paste the complete requirement or upload an Excel, CSV or PDF sign list.
Can I search different IMPA and Everlux formats?
Yes. Searches such as 334069, 33.4069, 33-4069, S0301 and S 03 01 are normalised to find the same relevant products.
Does each Everlux sign have one IMPA number?
No. Some products have no IMPA number, and some closely related designs or variants have different IMPA references. MariTeam validates the selected product and variant before quotation.
What happens if my uploaded list cannot be matched automatically?
The line remains for manual review. The system never invents a size, material, IMPA number or compliance statement.
Should I choose a rigid or self-adhesive sign?
Self-adhesive signs require a smooth, flat and properly prepared surface. Rigid signs are generally better suited to rough, porous or uneven surfaces.
How long does a self-adhesive sign take to reach full adhesion?
Everlux states approximately 50% adhesion after 20 minutes, 90% after 24 hours and 100% after 72 hours at room temperature.
How should Everlux signs be cleaned and protected?
Use a dry cloth or a cloth dampened with water and avoid detergents. Extra protection may be appropriate in harsh marine areas.